TSG S type anti-overload load cell

Execution standard:
GB/T 7551-1997 Certificate
(eqv OIML R60)
Combined error: 0.015%

Sealed to IEC 529:
Protection grade: IP67 or IP68.
Protection against total immersion
in water for 30 minutes at a pressure
corresponding to a 1 m head of water.

Dimensions

(In mm. 1mm = 0.03937 inches)

CAP./SIZE(kg)	H	B	W	M
0.5,1t	80	70	26	M12
2,3,5t	108	96	26	M18*1.5
7.5t	140	110	32	M24*2
10t	178	130	51	M30*2
15,20t	190	160	60	M39*2

 

Circuit Diagram:

Electrical Termination
4 Core cable standard lengths:
0.5~20t: 3m
Diameter: Φ6
Connection:
Refer to the following drawing:

Notice: Do not change the length of cable, or lese, it will effect the sensitivity of load cell.

 

Specification

Item\ Parameter	C3	Unit
Rated load (Emax):	0.5,1,2,3,5,7.5,10,20	t
Maximal numbers of load cell verification Intervals (Nlc):	3000	d
Minimum load cell verification intervals Intervals ( Vmin):	0.01	% of rated load
Rated output (Cn):	2.0±0.1%	mV/V
Combined error:	0.015	-% of rated output
Temperature effect on sensitivity(Tkc):	0.0012	=% of rated output/
Temperature effect on zero balance(Tk0):	0.0008	-% of rated output
Zero balance:	1.0	-% of rated output
Input resistance(Rlc):	385±5	Ω(Ohms)
Output resistance(Ro):	351±2	Ω(Ohms)
Insulation resistance:	≥5000	MΩ (Mega-Ohms)
Safe overload:	150	% of rated capability
Ultimate overload:	300	% of rated capability
Operating temperature range:	-20~+70/-20~+160	℃/ °F
Recommend excitation:	8~15	V( DC or AC)
Maximum excitation:	18	V( DC or AC)
Material of elastomer:	Alloy steel / Stainless steel
Protection class:	IP67/IP68

The data for deviation of synthesis error,TK0,TKc are typicl values. The sum of these
data meets the requirements according to OIML R60