QSC-M QSC weighing module

Execution standard:
GB/T 7551-1997 Certificate
(eqv OIML R60)
Combined error: 0.015%

Sealed to IEC 529:
Protection grade: IP67 or IP68.
Protection against total immersion in water for 30 minutes at a pressure corresponding to a 1 m head of water.

 

Dimensions

(In mm. 1mm = 0.03937 inches)

CAP./SIZE（klb）	A	B	C	D	E	F	G	H	L	M	N
5~20	11.00	8.00	5.50	3.00	8.00	4.00	1.06	0.63	0.75	0.50	5.48
30~75	15.00	10.00	8.00	5.13	11.50	6.00	1.22	0.75	1.00	0.75	8.43
100~150	18.00	2.00	10.00	7.50	14.00	9.00	1.38	0.81	1.25	1.25	10.39
200	26.00	12.00	12.00	9.00	20.00	9.00	1.88	1.06	2.00	2.00	15.73

 

Circuit Diagram:

Electrical Termination
4 Core cable standard lengths:
<=30klbs: 6.0 m, >=50klbs: 12.0m
Diameter: Φ6
Connection:
Refer to the following drawing:

Notice:

Do not change the length of cable, or lese, it will effect the sensitivity of load cell.

 

Specification

Item\ Parameter	C3	Unit
Rated load (Emax):	5,10,20,30,60,100,150,200	klbs
Maximal numbers of load cell verification Intervals (Nlc):	3000	d
Minimum load cell verification intervals Intervals ( Vmin):	0.01	% of rated load
Rated output (Cn):	2.0±0.1%	mV/V
Combined error:	0.015	-% of rated output
Temperature effect on sensitivity(Tkc):	0.0012	=% of rated output/
Temperature effect on zero balance(Tk0):	0.0008	-% of rated output
Zero balance:	1.0	-% of rated output
Input resistance(Rlc):	775±5	Ω(Ohms)
Output resistance(Ro):	702±2	Ω(Ohms)
Insulation resistance:	≥5000	MΩ (Mega-Ohms)
Safe overload:	150	% of rated capability
Ultimate overload:	300	% of rated capability
Operating temperature range:	-20~+70/-20~+160	℃/ °F
Recommend excitation:	8~15	V( DC or AC)
Maximum excitation:	24	V( DC or AC)
Material of elastomer:	Alloy steel / Stainless steel
Protection class:	IP67/IP68

The data for deviation of synthesis error,TK0,TKc are typicl values. The sum of these
data meets the requirements according to OIML R60