Load Cell and Weighing Scale
Welcome to Benui Electric Company
Benui Electric > Load cell > Digital load cell > QS-D Double beam digital load cell

QS-D Double beam digital load cell

Model: QS-D
Rated output:
Digital:30,000 or 1,000,000d
Accuracy: C3 OIML R60
Material of elastomer: Alloy steel or stainless steel

Details Description

Execution standard:
GB/T 7551-1997 Certificate
(eqv OIML R60)
Combined error: 0.015%

Sealed to IEC 529:
Protection grade: IP67 or IP68.
Protection against total immersion in water for 30 minutes at a pressure corresponding to a 1 m head of water.



(In mm. 1mm = 0.03937 inches)

QS-D Double beam digital load cell QS-D Double beam digital load cell

(**) are for QS-40~50t


Circuit Diagram:

6 Core cable connection:

QS-D Double beam digital load cell

Notice:The 7 and/or 5 wires of cable should be short circuit before using.



Item\ Parameter C3 Unit
Rated load (Emax): 10,20,30,40,50 t
Maximal numbers of load cell verification Intervals (Nlc): 3000 d
Minimum load cell verification intervals Intervals ( Vmin): 0.01 % of rated load
Rated output (Cn): 30,000 or 100,000 d
Combined error: 0.015 -% of rated output
Temperature effect on sensitivity(Tkc): 0.0012 =% of rated output/
Temperature effect on zero balance(Tk0): 0.0008 -% of rated output
Zero balance: 1.0 -% of rated output
Measuring rate A/D: 50/25 /Sec
Baudrate: 9600/19200 Bps
Filter mode 1: 3~0.05(Low pass filter) HZ
Filter mode 0: 8~3(Low pass filter) HZ
Maxium transmission distance: 1200 m
Safe overload: 150 % of rated capability
Ultimate overload: 300 % of rated capability
Operating temperature range: -20~+70/-20~+160 ℃/ °F
Recommend excitation: 8~15 V( DC or AC)
Maximum excitation: 24 V( DC or AC)
Material of elastomer: Alloy steel / Stainless steel
Protection class: IP67/IP68

The data for deviation of synthesis error,TK0,TKc are typicl values. The sum of these
data meets the requirements according to OIML R60