Load Cell and Weighing Scale
Welcome to Benui Electric Company

LP Double beam load pin

Model: LP


Accuracy: C2 OIML R60.
Material of elastomer: Alloy steel or stainless steel.

  Details >>
Details Description

Execution standard:
GB/T 7551-2008 Certificate
(eqv OIML R60)
Combined error : 0.027%

Sealed to IEC 529:
Protection grade: IP67 or IP68. Protection against total immersion in water for 30 minutes at a pressure corresponding to a 1 m head of water.



(In mm. 1mm = 0.03937 inches)


LP Double beam load pin


Circuit Diagram:

Electrical Termination
4 Core cable standard lengths:
<=30t: 12.0 m, >=40t: 18m.
Diameter: 6
Refer to the following drawing.
LP Double beam load pin


Do not change the length of cable, or else, it will effect the sensitivity of load cell



Item\ Parameter C2 Unit
Rated load:(Emax) 1,2,3,5,10 t
Maximal numbers of load cell verification
2000 d
Minimum load cell verification intervals
Intervals( Vmin):
0.02 % of rated load
Rated output(Cn): 2.0±0.1% mV/V
Combined error: 0.027 -% of rated output
Temperature effect on sensitivity
0.0024 -% of rated output/℃
Temperature effect on zero balance
0.002 -% of rated output/℃
Zero balance 1.0 -% of rated output
Input resistance(Rlc) 775±5 Ω(Ohms)
Output resistance(Ro) 702±2 Ω(Ohms)
Insulation resistance ≥5000 MΩ (Mega-Ohms)
Safe overload 150 % of rated capability
Ultimate overload 300 % of rated capability
Operating temperature range -20~+70/-20~+160 ℃/°F
Recommend excitation 8~15 V( DC or AC)
Maximum excitation 24 V( DC or AC)
Material of elastomer Al oy steel / Stainless steel
Protection class IP67/IP68

The data for deviation of synthesis error,TKo,TKc are typicl values.
The sum of these data meets the requirements according to OIML R60.