BCP Column load cell

Execution standard:
GB/T 7551-2008 Certificate
(eqv OIML R60)
Combined error : 0.027%

Sealed to IEC 529:
Protection grade: IP67 or IP68. Protection against total immersion in water for 30 minutes at a pressure corresponding to a 1 m head of water.

Dimensions

(In mm. 1mm = 0.03937 inches)

CAP./SIZE	A	B	C	D	E	F	H	K	L
20~50 klbs	190.5	114.3	57.1	31.8	12.7	19.1	63.5	60.3	3/8-24
100klbs	231.8	152.4	79.4	44.5	15.9	27.0	64.3	101.6	1/2-20
200klbs	295.3	203.2	114.3	63.5	15.9	27.0	89.7	139.7	5/8-18
300klbs	355.8	252	127	76.2	19.1	33.3	109.5	139.7	3/4-16

 

Circuit Diagram:

Electrical Termination
4 Core cable standard lengths:
<=50klbs: 3.0 m, >=100klbs: 10m.
Diameter:Φ6
Connection:
Refer to the following drawing:

Notice:Do not change the length of cable, or lese, it will effect the sensitivity of load cell.

 

Specification

Item\ Parameter	C3	Unit
Rated load (Emax):	20,30,50,100,200,300	klbs
Maximal numbers of load cell verification Intervals (Nlc):	3000	d
Minimum load cell verification intervals Intervals ( Vmin):	0.01	% of rated load
Rated output (Cn):	2.0±0.1%	mV/V
Combined error:	0.015	-% of rated output
Temperature effect on sensitivity(Tkc):	0.0012	=% of rated output/
Temperature effect on zero balance(Tk0):	0.0008	-% of rated output
Zero balance:	1.0	-% of rated output
Input resistance(Rlc):	775±5	Ω(Ohms)
Output resistance(Ro):	702±2	Ω(Ohms)
Insulation resistance:	≥5000	MΩ (Mega-Ohms)
Safe overload:	150	% of rated capability
Ultimate overload:	300	% of rated capability
Operating temperature range:	-20~+70/-20~+160	℃/ °F
Recommend excitation:	8~15	V( DC or AC)
Maximum excitation:	24	V( DC or AC)
Material of elastomer:	Alloy steel / Stainless steel
Protection class:	IP67/IP68

The data for deviation of synthesis error,TK0,TKc are typicl values. The sum of these
data meets the requirements according to OIML R60