Load Cell and Weighing Scale
   中文版
   Contact
Welcome to Benui Electric Company
Benui Electric > Load cell > Single point load cell > BA619 Single point load cell

BA619 Single point load cell

Model: BA619
Description:
Capacities:(Emax)

20,50,100,200,300kg
Rated output:
2.0mV/V
Accuracy: C3 OIML R60
Material of elastomer: Aluminum,alloy or stainless steel

  Details >>
Details Description

Execution standard:
GB/T 7551-2008 Certificate
(eqv OIML R60)
Combined error : 0.015%


Sealed to IEC 529:
Protection grade: IP66. Enclusure is immersed in water in its service position for 30min.
Lowest point of enclosure less than 850mm tall=1000mm below surface of water.
Highest point of enclosure more than 850mm tall=150mm below surface of water.

 

Dimensions

(In mm. 1mm = 0.03937 inches)

BA619 Single point load cell
BA619 Single point load cell

Circuit Diagram:

Electrical Termination
4 Core cable standard lengths:1.5m.
Diameter: Φ4.2

Connection

Refer to the following drawing:

BA619 Single point load cell

Notice: Do not change the length of cable, or lese, it will effect the sensitivity of load cell.

 

Specification


Item\ Parameter C3 Unit
Rated load (Emax):

100,150,200,250,300

kg
Maximal numbers of load cell verification
Intervals (Nlc):
3000 d
Minimum load cell verification intervals

Intervals ( Vmin):
0.01 % of rated load
Rated output (Cn): 2.0±0.5% mV/V
Combined error: 0.015 ±% of rated output
Temperature effect on sensitivity(Tkc): 0.002 ±% of rated output/℃
Temperature effect on zero balance(Tk0): 0.001 ±% of rated output/℃
Zero balance: 1.0 ±% of rated output
Input resistance(Rlc): 385±15 Ω(Ohms)
Output resistance(Ro): 350±3 Ω(Ohms)
Insulation resistance: ≥5000 MΩ (Mega-Ohms)
Safe overload: 150 % of rated capability
Ultimate overload: 300 % of rated capability
Operating temperature range: -10~+40/14~+104 ℃/ °F
Recommend excitation: 8~12 V( DC or AC)
Maximum excitation: 18 V( DC or AC)
Material of elastomer:

Alloy steel / Stainless steel

Protection class:

IP67/IP68

The data for deviation of synthesis error,TK0,TKc are typicl values. The sum of these
data meets the requirements according to OIML R60